White Settlement, Benbrook

Spring Repair for White Settlement's 1970s Garage Doors

White Settlement homes mostly went up around 1974 - different spring and hardware setups than newer Benbrook-area stock. We drive the 5 miles in and carry parts for both.

(817) 985-1366 Request a quote

A broken torsion spring is visible above a white garage door.

Serving Benbrook, TXBackground-checked techsHonest, upfront pricingFast local response

What It Costs

We don't post a flat number because spring jobs aren't flat. A single torsion spring swap on a one-car door costs less than a matched pair on a double door, and if your opener's drive gear got chewed up fighting a broken spring, that's a separate line item. What we can tell you is that White Settlement's median household income sits at $56,472, noticeably below the wider service area's $92,599 - which is exactly why we quote the repair itself before we quote anything else, and why we don't push a full door replacement on someone who needs a spring swapped. If a tech tells you to replace when a spring would do, ask why.

The white garage door is closed, with an opener and torsion spring visible.

Booking a Visit

We run out of Benbrook, five miles east of White Settlement, so every visit here starts with that short drive - no depot, no satellite crew, just the same truck that covers the rest of the area.

Describe symptoms when booking

Book through the White Settlement coverage page or call and tell us what the door's doing: won't open, opens crooked, makes a bang then sits dead.

Bringing the right spring

That detail decides what spring we bring, and bringing the right one the first time matters more here since we're not already parked down the street.

The Symptom

Most of White Settlement went up around 1974, which puts a lot of these garages a few decades past the point where the original spring setup is still doing its job - torsion springs from that era weren't always sized the way a modern door with a heavier insulated panel needs, and plenty of these houses have had at least one door swap since without anyone touching the spring count or wire gauge. The classic sign is a door that won't budge, or one you can lift by hand with no resistance at all - that's a spring that's let go, not an opener problem. A door that slams down the last foot of travel instead of settling is usually telling you the same thing before it fully breaks.

How Long It Takes

A standard torsion spring replacement is a same-visit job once we're on-site - we don't leave a broken spring half-fixed and come back.

What stretches the visit

What stretches it out is anything non-standard: a spring size we don't carry on the truck, a shaft or bearing plate that's rusted solid, or an opener that needs its own part.

Ordering nonstandard springs

Here's the honest limit - if your door needs a spring size outside what we stock, that part has to be ordered, and we'll tell you that on-site rather than guess at a timeline we can't back up.

Stocked Parts

Across the wider area the housing stock runs 1953 to 2011 with a lot of it built in the 1980s and 90s, but White Settlement's own median year built is 1974 - older than most of what we see elsewhere in the territory. That means we keep standard torsion spring sizes for both the lighter single-car doors common on older lots and the heavier double-door setups that came in on later remodels. With 6,617 households in White Settlement, most of them past the age where an original spring is still in service, the sizes we stock are picked to match what's actually out there, not just what's newest. For anything outside that range, see what else we cover on the Benbrook spring repair page.

Questions

Common questions

Why does the price depend on where I live if you're based in Benbrook?

It doesn't depend on location so much as on the door and spring itself - a single spring on a one-car door costs less than a matched pair on a double. We quote the job once we see the door and the spring size, not based on the town.

Do you have a shop in White Settlement?

No. We run out of Benbrook, about five miles away, and drive in for every job. There's no local depot, just the one truck crew covering White Settlement and the rest of the area.

My door is from the 1970s - can you still get the spring?

Usually, yes. Standard torsion spring sizes from that era are still made and we stock common ones. If your door's had a nonstandard spring installed at some point, that part may need ordering, which we'll confirm on-site.

Is it ever better to replace the door instead of the spring?

Rarely, for a spring issue alone. A broken spring doesn't mean the door or opener is bad. We'd only bring up replacement if the door itself has separate problems - rot, bent panels, a dead opener - on top of the spring.

Explore more